Presto RW+ - Vepa the furniture factory

Presto RW+

Presto RW+ is a very interesting desk range. The top and frame can be assembled and/or disassembled by tightening or loosening a single screw.

Presto RW+ wordt gekenmerkt door het bekabelbare wangenonderstel. De 8 cm dikke wang loopt altijd gelijk met bladdiepte en heeft een uitneembaar binnenpaneel. Presto RW+ is een bureauprogramma met uitgebreide maatvoering.

De centrale traverse met bladdragers zorgt voor een stabiele constructie en eenvoudig ‘aanhangen’ van functionele accessoires, zoals 2-zijdig kantelbare kabelgoot, CPU houder en contactdozen doordat er geen hinderlijke frameconstructie aan de lange zijde is.

Het binnenpaneel van beide wangen is gemakkelijk uitneembaar.
Het bureau is tevens voorzien van justeerdoppen voor het eenvoudig waterpas stellen.

Product information

Desk range with a compact, modern design for offices, meeting rooms and so on.


  • smart facilities program: ultra-fast (dis)assembly of top, frame and legs by only 1 bolt per leg
  • very stable thanks to specially developed central crossbar with top supports
  • thanks to central crossbar no inconvenient frame construction on the long side; providing optimal legroom
  • side panels are equipped with adjustable caps with an adjustment range of 20 mm for easy levelling
  • frame with side panels: 8 cm thick, 56 cm high, 80 or 90 cm wide (depending on depth of table top). Side panel always parallel to top depth
  • side panel frame has an interior panel that is easy to remove (attached with magnets) for vertical cabling through the side panel
  • interior panel equipped with 2 recesses for cable management
  • underside side panel equipped with 2 recesses for vertical cable management from floor through side panel to, for example, cable duct
  • workplaces sit-sit up to size 160 cm are delivered completely assembled
  • workplaces from size 180 cm and all sizes sit-stand are delivered partially assembled
  • on project basis in further consultation

Materials – tops

  • 12 mm PEFC™ solid core
  • 18 mm PEFC™ melamine with LaserTec edge finish
  • 18 mm PEFC™ hpl with LaserTec edge finish
  • 25 mm PEFC™ melamine with LaserTec edge finish
  • 25 mm PEFC™ hpl with LaserTec edge finish
  • colours in accordance with colour charts “Décors Core collection” and Décors Trend collection”

Materials – frame

  • made from high-grade calibrated steel finished with an impact-resistant powder coating
  • top support on visible sides, legs and feet epoxied: colours in accordance with colour charts “Epoxy and lacquer Core collection” and “Epoxy and lacquer Trend collection”
  • top crossbar epoxied in black

For the complete specifications of desk Step 4: see product sheet under “Documents”


  • extensive range horizontal and vertical cabling options, such as double-sided tiltable cable tray, cable clamps, cable outlet covers, etc.
  • extensive options for electrification such as panel mounted and flush mounted sockets
  • adjustable CPU holder
  • desk drawer
  • front panel
  • upholstered (acoustic) top mounted partitions from the InBetween range
  • can be complemented with various conference ranges

Décors COREcollection

Décors TRENDcollection

Epoxy and lacquer

Epoxy and lacquer TRENDcollection

Epoxy and lacquer COREcollection

ISO 9001 – EN

ISO 14001 – EN

Available as FSC®


LaserTec edgebanding

NEN standards

Electrification and accessories – product sheet

Presto RT/RW/RW+ – product sheet

Presto R/RW/RW+ duo-4-persons – product sheet

Manual Vepa Inline adjustment system


Step 4 is designed, developed and made in Holland.

Made in Holland: Vepa distinguishes itself by producing everything in its own facilities in the Netherlands. Our own wood, sheet steel, tubular steel, powder coating, wood spray, upholstery and final assembly departments form a complete production circle within a single company. By producing close to the sales market we keep distances small and CO2 emissions minimal.

LCA: By using independent LCAs (life cycle analysis) we reveal the environmental impact of a product. In product development we can greatly improve later designs by carrying out an LCA in the initial phase. In addition, an LCA also provides insight into the main factors responsible for the environmental damage. We then use these factors as starting points for redesign or as focal points for improvement. The LCAs are carried out in accordance with ISO 14044.

FSC® and PEFC™: Vepa only uses certified wood. The FSC® and PEFC™ labels stand for responsible and sustainable forest management. Responsible forest management meets three criteria: it takes account of the environment, respects social aspects (such as the rights of local communities and forest workers) and is economically viable. Moreover, wood is the number one bio-based resource by nature.

TPAC (Timber Procurement Assessment Committee): Timber to be supplied or timber processed in products to be supplied must comply with the Dutch Procurement Criteria for Timber according to the Socially Responsible Procurement criteria. FSC® and PEFC™ are both systems that have been approved by the Dutch state secretary.

SRP criteria: Vepa complies with the SRP criteria drawn up by the central government. The national criteria for socially responsible procurement (SRP) for office furniture are available via the SRP criteria tool (

Feeling inspired?

Would you like to receive more information or would you like to speak to someone personally?
Please don’t hesitate to call or send us an email. We would love to hear from you!


a fair furniture company